Hallo Forum, brauch mal wieder eure Unterstützung.
Ich habe zwar in meinem Laptop eine interne Wlan-Karte würde aber gerne meinen Wlan Adapter benutzen da dieser 5GHz beherscht, mehr Reichweite hat und stabiler läuft.
Der Wlan Adapter ist von CLS und hat den Chipsatz: Ralink RT5572.
Leider finde ich für Linux keinen Treiber um diesen zum Laufen zu bringen.
Wäre super wenn mich jemand unterstützen kann.
Hier mal ein paar Details. Solltet Ihr noch mehr Infos benötigen sagt bitte Bescheid.
Code
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 1358:c123 Realtek Bluetooth Radio
Bus 003 Device 002: ID 24ae:2014 RAPOO Rapoo 2.4G Wireless Device
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 17e9:436f DisplayLink
Bus 002 Device 002: ID 2109:0210 VIA Labs, Inc. USB3.0 Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0408:1040 Quanta Computer, Inc. USB2.0 Hub
Bus 001 Device 005: ID 27c6:5110 Shenzhen Goodix Technology Co.,Ltd.
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 007: ID 148f:5572 Ralink Technology, Corp. RT5572 Wireless Adapter
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 002: ID 2109:2210 VIA Labs, Inc. USB2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Alles anzeigen
Code
wlxdc4ef40a47e0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether dc:4e:f4:0a:47:e0 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Danke im Voraus!