Beiträge von Dennis777

hdparm -i /dev/sda
/dev/sda:
Model=Intenso SSD Sata III, FwRev=S0222A0, SerialNo=AC000000002342284526
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=unknown, MaxMultSect=1, MultSect=off
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=250069680
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes:  pio0 pio1 pio2 pio3 pio4 
DMA modes:  mdma0 mdma1 mdma2 
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
AdvancedPM=yes: unknown setting WriteCache=enabled
Drive conforms to: unknown:  ATA/ATAPI-4,5,6,7
* signifies the current active mode

testdisk.log

Sun Apr 21 09:28:21 2024
Command line: TestDisk

TestDisk 7.1, Data Recovery Utility, July 2019
Christophe GRENIER <grenier@cgsecurity.org>
https://www.cgsecurity.org
OS: Linux, kernel 6.6.9-amd64 (#1 SMP PREEMPT_DYNAMIC 6.6.9-1(2024-01-08)) x86_64
Compiler: GCC 12.2
ext2fs lib: 1.47.0, ntfs lib: libntfs-3g, reiserfs lib: none, ewf lib: none, curses lib: ncurses 6.3
/dev/sda: LBA, LBA48 support
/dev/sda: size       419430400 sectors
/dev/sda: user_max   419430400 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop0 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop1 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop2 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop3 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop4 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop5 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop6 - 0 B - 0 sectors, sector size=512
Warning: can't get size for Disk /dev/loop7 - 0 B - 0 sectors, sector size=512
Hard disk list
Disk /dev/sda - 214 GB / 200 GiB - CHS 26108 255 63, sector size=512 - VBOX HARDDISK, S/N:V667fgh5b-fdstzz78, FW:1.0
Disk /dev/sdb - 128 GB / 119 GiB - CHS 15566 255 63, sector size=512 - ANKEJE USB3.0, FW:4101

Partition table type (auto): Intel
Disk /dev/sdb - 128 GB / 119 GiB - ANKEJE USB3.0
Partition table type: Intel
Partition table has been cleared.
You have to reboot for the change to take effect.

Analyse Disk /dev/sdb - 128 GB / 119 GiB - CHS 15566 255 63
Current partition structure:
No partition is bootable

search_part()
Disk /dev/sdb - 128 GB / 119 GiB - CHS 15566 255 63

recover_EXT2: s_block_group_nr=0/946, s_mnt_count=414/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 31008256
recover_EXT2: part_size 248066048
Filesystem created: Wed Sep 13 19:15:16 2023
Last mount time:    Fri Apr 19 04:17:03 2024
     Linux                    0  32 33 15441 133 52  248066048
     ext4 blocksize=4096 Large_file Sparse_SB Recover, 127 GB / 118 GiB
     Linux Swap           15441 166 22 15566  18 52    1998832
     SWAP2 version 1, pagesize=4096, 1023 MB / 975 MiB

Results
   * Linux                    0  32 33 15441 133 52  248066048
     ext4 blocksize=4096 Large_file Sparse_SB Recover, 127 GB / 118 GiB
   P Linux Swap           15441 166 22 15566  19  5    1998848
     SWAP2 version 1, pagesize=4096, 1023 MB / 976 MiB

Hint for advanced users: dmsetup may be used if you prefer to avoid rewriting the partition table for the moment:
echo "0 248066048 linear /dev/sdb 2048" | dmsetup create test0
echo "0 1998848 linear /dev/sdb 248070144" | dmsetup create test1

interface_write()
 1 * Linux                    0  32 33 15441 133 52  248066048
 2 P Linux Swap           15441 166 22 15566  19  5    1998848
write!

write_mbr_i386: starting...
write_all_log_i386: starting...
No extended partition
You will have to reboot for the change to take effect.
Partition table has been cleared.
You have to reboot for the change to take effect.

TestDisk exited normally.