Kein WLAN beim HP EliteBook x360 1040 G6

Hallo zusammen,

Ich bekomme bei einer Installation von Mint 22 auf dem HP EliteBook x360 1040 G6 einfach kein WLAN zustande.
Es wird der ganze Adapter nicht angezeigt. Eine USB / RJ45 Verbindung habe ich gemacht, um alle updates zu haben, dennoch....kein WLAN.
Kann jemand helfen?

Vielen Dank...

Gerne....

System:
Kernel: 6.8.0-50-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
Desktop: Cinnamon v: 6.2.9 tk: GTK v: 3.24.41 wm: Muffin v: 6.2.0 vt: 7 dm: LightDM v: 1.30.0
Distro: Linux Mint 22 Wilma base: Ubuntu 24.04 noble
Machine:
Type: Convertible System: HP product: HP EliteBook x360 1040 G6 v: SBKPF
serial: <superuser required> Chassis: type: 31 serial: <superuser required>
Mobo: HP model: 857F v: KBC Version 60.49.00 serial: <superuser required> part-nu: 5UN71AV
uuid: <superuser required> UEFI: HP v: R90 Ver. 01.30.00 date: 11/12/2024
Battery:
ID-1: BAT0 charge: 43.4 Wh (98.0%) condition: 44.3/56.2 Wh (78.8%) volts: 8.2 min: 7.7
model: Hewlett-Packard Primary type: Li-ion serial: <filter> status: not charging cycles: 3
CPU:
Info: quad core model: Intel Core i5-8365U bits: 64 type: MT MCP smt: enabled
arch: Comet/Whiskey Lake note: check rev: C cache: L1: 256 KiB L2: 1024 KiB L3: 6 MiB
Speed (MHz): avg: 1600 min/max: 400/1600 cores: 1: 1600 2: 1600 3: 1600 4: 1600 5: 1600 6: 1600
7: 1600 8: 1600 bogomips: 30399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Hewlett-Packard driver: i915
v: kernel arch: Gen-9.5 ports: active: eDP-1 empty: DP-1, DP-2, DP-3, HDMI-A-1, HDMI-A-2,
HDMI-A-3 bus-ID: 00:02.0 chip-ID: 8086:3ea0 class-ID: 0300
Device-2: Quanta HP Full-HD Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
bus-ID: 1-9:4 chip-ID: 0408:5390 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: modesetting
unloaded: fbdev,vesa dri: iris gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: InfoVision Optronics/Kunshan 0x8c68 res: 1920x1080 hz: 60 dpi: 158
size: 309x174mm (12.17x6.85") diag: 355mm (14") modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris device: 1 drv: swrast
surfaceless: drv: iris x11: drv: iris inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.9-0ubuntu0.3 glx-v: 1.4
direct-render: yes renderer: Mesa Intel UHD Graphics 620 (WHL GT2) device-ID: 8086:3ea0
Audio:
Device-1: Intel Cannon Point-LP High Definition Audio vendor: Hewlett-Packard
driver: sof-audio-pci-intel-cnl bus-ID: 00:1f.3 chip-ID: 8086:9dc8 class-ID: 0401
API: ALSA v: k6.8.0-50-generic status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: N/A pcie: speed: 5 GT/s lanes: 1 bus-ID: 6c:00.0
chip-ID: 8086:2723 class-ID: 0280
Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB rev: 3.2 speed: 5 Gb/s
lanes: 1 bus-ID: 2-1:2 chip-ID: 0b95:1790 class-ID: 0a00 serial: <filter>
IF: enxc8a36221cf91 state: up speed: N/A duplex: half mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
bus-ID: 1-10:6 chip-ID: 8087:0029 class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 5.2 lmp-v: 11
sub-v: 2184 hci-v: 11 rev: 2184 class-ID: 7c0000
Drives:
Local Storage: total: 238.47 GiB used: 10.29 GiB (4.3%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB256HBHQ-000H1 size: 238.47 GiB speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: HPS0NEXH temp: 32.9 C scheme: GPT
Partition:
ID-1: / size: 233.18 GiB used: 10.28 GiB (4.4%) fs: ext4 dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s lanes: 1
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-8:3 info: Synaptics Fingerprint reader [HP G6] type: <vendor specific> driver: N/A
interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 06cb:00b7 class-ID: ff00
serial: <filter>
Device-2: 1-9:4 info: Quanta HP Full-HD Camera type: video driver: uvcvideo interfaces: 4
rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 0408:5390 class-ID: 0e02 serial: <filter>
Device-3: 1-10:6 info: Intel AX200 Bluetooth type: bluetooth driver: btusb interfaces: 2
rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0029 class-ID: e001
Hub-2: 2-0:1 info: super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
class-ID: 0900
Device-1: 2-1:2 info: ASIX AX88179 Gigabit Ethernet type: communication,CDC-data
driver: cdc_ncm interfaces: 2 rev: 3.2 speed: 5 Gb/s lanes: 1 power: 184mA chip-ID: 0b95:1790
class-ID: 0a00 serial: <filter>
Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1
chip-ID: 1d6b:0002 class-ID: 0900
Hub-4: 4-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 42.0 C pch: 42.0 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: pm: dpkg pkgs: 1901
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //linux-mint.froonix.org wilma main upstream import backport
2: deb http: //artfiles.org/ubuntu.com noble main restricted universe multiverse
3: deb http: //artfiles.org/ubuntu.com noble-updates main restricted universe multiverse
4: deb http: //artfiles.org/ubuntu.com noble-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
Info:
Memory: total: 16 GiB note: est. available: 15.43 GiB used: 1.38 GiB (8.9%)
Processes: 256 Power: uptime: 10m states: freeze,mem,disk suspend: s2idle wakeups: 0
hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
Compilers: gcc: 13.3.0 Client: Unknown python3.12 client inxi: 3.3.34

Quote from josefine

Kann es sein, dass dein Wlan Hardwaremäßig ausgeschaltet ist?

Das dachte ich auch schon....nur ich finde keine Möglichkeit es einzuschalten...und Bluetooth geht sehr wohl, das mal an dieser Stelle....

Quote from karl-heinz-lnx

Hast du ein Dualboot auf der Maschine?

nein...

Quote from Harry

Ist dein WLAN Modul im BIOS aktiviert?

Das hatte ich auch schon gedacht...war aber an.

Mittlerweile geht es aber. Was war es...? Nun, ich weiß es nicht. Ich bin aus meinem Büro runter zum essen, etwas fern geschaut....dann wieder hoch, das Ding gestartet....WLAN verfügbar...einfach so?????????

Keine Ahnung.....

Vielen Dank an alle,

Mittlerweile geht es ja wieder..und das dauerhaft...

Quote from josefine

Und wo lag der Fehler?

Das hätte ich auch gerne gewusst....sollte ich da weitere Erkenntnisse haben, werde ich diese hier teilen....