- Distrowahl
- Ubuntu
- Bitte den Befehl "inxi -Fzxi" (ohne die Anführungszeichen) im Terminal ausführen und die Ausgabe dann hier hinein kopieren
- hagi@BIG:~$ inxi -Fzr
System:
Kernel: 6.14.0-36-generic arch: x86_64 bits: 64
Desktop: GNOME v: 46.0 Distro: Ubuntu 24.04.1 LTS (Noble Numbat)
Machine:
Type: Desktop System: Gigabyte product: N/A v: N/A
serial: <superuser required>
Mobo: Gigabyte model: H77-DS3H v: x.x serial: <superuser required>
UEFI: American Megatrends v: F7 SG date: 11/14/2012
CPU:
Info: quad core model: Intel Core i7-3770 bits: 64 type: MT MCP cache:
L2: 1024 KiB
Speed (MHz): avg: 2651 min/max: 1600/3900 cores: 1: 1600 2: 3578 3: 1600
4: 1889 5: 3229 6: 3715 7: 3102 8: 2497
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] driver: nvidia
v: 580.105.08
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X:
loaded: nvidia unloaded: fbdev,modesetting,nouveau,vesa
gpu: nvidia,nvidia-nvswitch resolution: 1: 1680x1050~60Hz
2: 1920x1080~60Hz
API: EGL v: 1.5 drivers: kms_swrast,nouveau,swrast,zink
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6 compat-v: 4.5 vendor: nvidia mesa v: 580.105.08
renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio
driver: snd_hda_intel
Device-2: NVIDIA GA106 High Definition Audio driver: snd_hda_intel
API: ALSA v: k6.14.0-36-generic status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active
Network:
Device-1: Qualcomm Atheros AR8161 Gigabit Ethernet driver: alx
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 2.73 TiB used: 309.9 GiB (11.1%)
ID-1: /dev/sda vendor: Crucial model: CT500MX500SSD1 size: 465.76 GiB
ID-2: /dev/sdb vendor: Western Digital model: WD10EURX-73FH1Y0
size: 931.51 GiB
ID-3: /dev/sdc vendor: Western Digital model: WD10EZRX-00A8LB0
size: 931.51 GiB
ID-4: /dev/sdd vendor: Toshiba model: MQ01UBD050 size: 465.76 GiB
type: USB
Partition:
ID-1: / size: 456.35 GiB used: 122.02 GiB (26.7%) fs: ext4 dev: /dev/sda2
ID-2: /boot/efi size: 1.05 GiB used: 6.1 MiB (0.6%) fs: vfat
dev: /dev/sda1
Swap:
ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) file: /swap.img
Sensors:
System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 48 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 81%
Repos:
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/appimagelauncher-team-ubuntu-stable-noble.sources
1: deb ppa.launchpadcontent.net/appim…ncher-team/stable/ubuntu/ noble main
Active apt repos in: /etc/apt/sources.list.d/graphics-drivers-ubuntu-ppa-noble.sources
1: deb ppa.launchpadcontent.net/graphics-drivers/ppa/ubuntu/ noble main
Active apt repos in: /etc/apt/sources.list.d/ubuntu.sources
1: deb ch.archive.ubuntu.com/ubuntu/ noble noble-updates noble-backports main restricted universe multiverse
2: deb security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
Info:
Memory: total: 24 GiB available: 23.43 GiB used: 1.73 GiB (7.4%)
Processes: 333 Uptime: 0m Shell: Bash inxi: 3.3.34
Nach jedem Neustart ist die Auflösung auf 800x600 blockiert und kann nicht verändert werden. Der NVIDIA Driver ist weg.
Graphics:
Device-1: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] driver: N/A
Display: wayland server: X.Org v: 23.2.6 with: Xwayland v: 23.2.6
compositor: gnome-shell driver: X: loaded: nvidia
unloaded: fbdev,modesetting,nouveau,vesa dri: swrast gpu: N/A
resolution: 800x600~60Hz
API: EGL v: 1.5 drivers: swrast
platforms: wayland,x11,surfaceless,device
API: OpenGL v: 4.5 vendor: mesa v: 25.0.7-0ubuntu0.24.04.2
renderer: llvmpipe (LLVM 20.1.2 256 bits)
Ich kann das System aktualisieren, aber nach dem erforderlichen Neustart ist die Grafik wieder blockiert.
Damit ich weiterarbeiten kann, hole ich den vorherigen Zustand mit Timeshift zurück.
Was könnte die Ursache dieses mühsamen Zustandes sein? Danke für Tipps.
Ruschco
